Load cards and photo paper
Use these instructions to load cards and photo paper.
1.
Lift the output tray.
2.
Slide the paper guides out as far as possible.
3.
Insert the paper print-side down along the right edge of the main tray.
Make sure the stack of paper aligns with the right and back edges of the tray and does not
exceed the line marking in the tray. If the photo paper has a tab along one edge, make sure the
tab is pointing towards the front of the printer.
NOTE: Do not load cards or photo paper while the printer is printing.
4.
Slide the paper guides in the tray to adjust them for the paper size that you have loaded.
12 Chapter 1 Get started
ENWW
5.
Lower the output tray.
6.
Pull out the output tray extension.